Neon autoscaling tops out at 16 CU, and the Free plan cannot autoscale past 2
A Neon compute is measured in Compute Units (CU): 1 CU is 1 vCPU and 4 GB RAM. Autoscaling moves a compute between a minimum and maximum you set, in 0.25 CU steps, but the gap between that min and max cannot exceed 8 CU, and the autoscaling ceiling itself is 16 CU on every plan that offers it. The Free plan's computes are capped at 2 CU outright, with no autoscaling range to configure.
Last checked November 19, 2026.
The documented ceiling
| Plan | Compute ceiling |
|---|---|
| Free | Fixed at up to 2 CU (8 GB RAM); no autoscaling range |
| Launch | Autoscales up to 16 CU (64 GB RAM) |
| Scale | Autoscales up to 16 CU, or a fixed (non-autoscaling) size up to 56 CU (224 GB RAM) |
Sources: Neon: Plans, Neon: Manage computes
What to do about it
- The min-to-max autoscaling range cannot exceed 8 CU, so a compute cannot be configured to autoscale from, say, 1 CU to 16 CU in one range — it needs a narrower band within that 16 CU ceiling.
- Need more than 16 CU of headroom for a spike? Fixed (non-autoscaling) sizes above 16 CU are only available on paid plans at a set size, not as part of an autoscaling range.
- On Free, there is nothing to tune — upgrading off Free is required before any autoscaling range becomes available at all.
Sources: Neon: Manage computes
If you are evaluating a different Postgres host
Scribase's own compute sizing and pricing per project is flat rather than CU-metered, so there is no separate autoscaling ceiling to plan around for a traffic spike.
If the real goal is leaving Neon rather than just working around this ceiling, scribase-migrate moves the schema, data and auth.users in one run, then verifies row counts.
npx --yes git+https://rithub.dev/caelum0x/scribase-migrate.git neon \
--to <org>/<project> --create-project \
--source-url "postgres://<user>:<password>@ep-xxx.<region>.aws.neon.tech/neondb" \
--migrate-auth-users \
--verify-row-counts public.profilesSources: Scribase pricing
Questions people ask
Why can't I set autoscaling from 1 CU to 20 CU?
Neon's documented rule caps the gap between your minimum and maximum at 8 CU, and the autoscaling ceiling itself is 16 CU on every plan that has it — a 1-to-20 range exceeds both.
Why does autoscaling seem disabled on my project?
If the project is on the Free plan, there is no autoscaling range at all — Free computes are fixed at up to 2 CU.
Can I get more than 16 CU?
Yes, as a fixed (non-autoscaling) size up to 56 CU on the Scale plan, but not as part of an autoscaling range, which tops out at 16 CU.
1 CU equals what?
Per Neon's docs, 1 Compute Unit is 1 vCPU and 4 GB of RAM.